Elim A Dent Portable PDR Glue Gun

Summary

In this video, Jonathan Vandenfontyne demonstrates the Elim A Dent Portable PDR Glue Gun.  This glue gun is battery powered and accepts all the glue sticks used in the PDR Industry.

Video Transcript

 

Today we’d like to talk to you about our illuminant glue gun, and give you some info on the features that it has. It is a battery-powered glue gun. As you can see, this one is a Milwaukee battery. We have them with three different batteries: Milwaukee, dewalt batteries, or Makita. So it accepts all the glue sticks that we use in our PDR or pull to paint industry.

You have an on/off button. You have a high and a low. Why are these there? Well high or low
temperature, you can use it in the winter on high almost all the time because of the cold environment. But in summer, of course, when it's already hotter in the shop or outside when you work in mobile, you can put it on low and it’s warm enough to use.

We also have a USB on/off switch here, so you can charge your phone while you're on the move. Interesting to use. If for any reason you forgot your switch batteries or your other different
batteries, your spare ones. You can use this cable that's delivered with the gun, and you can use it here on the back side. Connect it, and use it in a 12-volt electrical plug. Then you can use your gun and start glue pulling.

 

Previous article Composite Blending Hammer
Next article Black Ice Hail Tabs

Leave a comment

* Required fields