Black Swan Guided Knockdown


In this 2 minute video, Jonathan Vandenfontyne demonstrates the KECO Black Swan Guided Knockdown.  The KECO Black Swan Guided Knockdown is used to create very steady and controlled punches, rather than knockdowns that you free hand.  

Video Transcript


today I would like to talk to you about our guided knockdown called the

Black Swan. It has some interesting features. First of all, it has a rubber foot that you can use to stabilize the swan and to control the vibration on the metal that you're working on. Secondly, instead of holding a knockdown with your hand- unstable. This tool holds your knockdown steady in the right position while knocking down. It's pure metal through the insert with a brace head so you can choose. Use the full metal knockdown or you can use a rubber cap to have more of a dead blow on the tips you're using. The extra nice thing is the knockdown can come in a set with four different tips. We have this small half a millimeter size tip, we have a line tip to address body lines, and then we have the R-4 with a rubber cap there and another rounded tip. You can use all those on knocking down small dents that you pulled up and micro tips that you want to knock down.

Some of the big differences are that you hold the thing you put it on the metal on the door on the roof on the side of the door whatever you want to work on, a hood like this one. I don't know if you can see it. Start knocking down, very stable, controlled punch instead of holding one like this.

If you want to know more about this tool go to our website or click the link below and start knocking now with our new tool.


Previous article K-Bar Leverage Pulling Bar
Next article Robo Hole Straightener

Leave a comment

* Required fields